| Adjustable Bearing Throttle Pedal Bearing gas pedal allows for smooth movement. Adjustable on both ends for greater comfort. Needle bearings are sealed in center tube |
|||
|---|---|---|---|
| PART# | DESCRIPTION | PRICE | |
 |
 BSB 3015S |
Adjustable Bearing Throttle Pedal - Straight | $125.00 |
| BSB 3015A-8 |
8 Degree Angled Aluminum Throttle Pedal | $125.00 | |
| 2-Piece Steel Bird Cages
These birdcages can be totally disassembled and can be floated or clamped. They are equipped with sealed bearings, dirt seals, lock rings, serrated spacers and washers, spring and shock mounts. The shocks can have a 6" or 7" shock drop. |
|||
|---|---|---|---|
| (click image for larger view) | PART# | DESCRIPTION | PRICE |
  |
BSB 8310-L |
Left Side Bird Cage |
$279.00 |
| BSB 8310-R |
Right Side Bird Cage |
$279.00 | |
 |
BSB 7400 |
Steel Swing-Arm Bird Cage Comes with machined nylon liners and side washers, and shock mount. |
$125.00 |
| Rear Suspension | |||
|---|---|---|---|
| (click image for larger view) | PART# | DESCRIPTION | PRICE |
 |
BSB 3056 |
Aluminum 2 x 2 2-Side Slotted Panhard Bar Frame Slider |
$125.00 |
 |
BSB 7054-20 |
Single Sided 2" Frame Slider Panhard Bar Mount | $69.95 |
 |
BSB 7011 |
Shock Mount Steel Bolts to the BSB Steel Bird Cages |
$14.95 |
 |
BSB 7206 |
Shock Mount with 2" Drop Bolts to the BSB Steel Bird Cages |
$13.95 |
 |
BSB 7036 |
Adjustable Steel Pinion Mount 9 Inch Ford - Screw Type Comes with adjuster stud, bushing and bolts 3/4" thick steel Standard offset |
$89.00 |
 |
BSB 7051-20 |
2" Steel Frame Slider Fits 2" Square Tubing, 2-sided Panhard Bar Mount |
$36.95 |
 |
BSB 7070 |
Bearing Brake Floater Steel One bearing design Fits metric caliper Bearing sizes .001,.004,.008 |
$129.00 |
 |
BSB 7451 |
Spring Bucket with Bearing 5 Inch Spring For mounting spring on top of axle tube. Com bearing design in cup for easy movement Can add or remove bucket from mount |
$59.00 |
| Kits and Tools | |||
|---|---|---|---|
| (click image for larger view) | PART# | DESCRIPTION | PRICE |
 |
BSB 9015 |
Rod End Gauge Accurately Set Your 4-Link and Tie Rod Lengths. Set Center To Center Lengths Easy To Measure Keeps Rod Ends Parallel |
$29.95 |
 |
BSB 7500
|
14" Coil Over Eliminator NEW state of the art bearing slider. New (Outlaw) bearing allows for less maintenance and higher load rating.The (Outlaw) bearing uses aircraft technologies to produce the smoothest bearing on the market. The Outlaw bearing can run 20x more side load than the standard linner bearing and has 5 times the life of a standard bearing. STANDARD FEATURES Outlaw bearing Double lip dirt seal 5/8 harden shaft Pin release lock nut Sloted top plate Floating lower plate 2" high spring retainers Totaled sealed tube for less maintenance . |
$134.95 |
| BSB 7504 |
Shaft For 7500 | $29.00 | |
| BSB 7504-RB |
Coil Over Repair Kit | $57.95 | |
 |
BSB 7510 |
Coil Over Eliminator Wrench | $11.95 |
 |
BSB 6650-B |
Coil Over Kit For Bilstein and QA1 Shocks Fits a 5.0" spring Fits Bilstein,QA1 &others Lynch pin in bottom for easy spring change Angel cut top for fast, no tool spring change (not picture) Threaded tube has scale on flat spots |
$85.00 |
 |
BSB 7066 |
Steel 6th Coil Bracket - 5 Inch Spring Allows it to swivel in four directions Keeps even pressure on chain Made from steel Fits short 5" springs Smoother suspension travel |
$90.00 |
| D-M 5-4-350 |
5" x 4" 350lb. Coil Spring | $46.95 | |
| D-M 5-4-400 |
5" x 4" 400lb. Coil Spring | $46.95 | |
 |
BSB-7600 |
BSB New Bearing Pull Bar uses the (Outlaw) bearing to offer the smoothes motion in a standard pull bar. This new design pull bar has relocated the brake biscuit to the head end of the bar. This allows you to preload the spring without going through the rubber biscuit. Dirt seals on each end of the bearing help keep this a maintenance free pull bar. Special Features: Outlaw Bearing Travel Indicator 20 1/2 between centers Harden Shaft Double Lip Dirt Seals Rod ends included. |
$209.00 |
 |
BSB 7630 |
The Ultimate Pull Bar 5 Inch Spring Outlaw Bearing 2 way pull bar improves corner entry New Brake side with red poly bushing Fast easy spring change Spring Not Included Closeout - While supplies Last |
$175.00 |
 |
BSB 7650 |
The Ultimate Pull Bar 20.5 " Long, Outlaw Bearing, Rod End Included. |
$209.00 |
| Click the to add an item to your shopping Cart ( you can always remove it later) |
