|
|
|||
|---|---|---|---|
| PART# | DESCRIPTION | PRICE | |
 Click for larger view |
 11-120 |
7" Small Block Chevy pre 1980 w/left side dipstick. 8 Quart capacity Shown above |
$229.00 |
| 11-120T |
7" Small Block Chevy 1986 and newer blocks. 8 Quart capacity |
$249.00 | |
| 20-070 |
P/U SBC 7" OT w/HVP | $32.99 | |
| 20-100 |
Oil Pump P/U Big Block Chevy | $37.75 | |
| 20-072 |
P/U SB Chevy 3/4 tube | $33.95 | |
 Click for larger view |
20-852 |
Oil Dipstick Kit 1/2" - 20 Universal Dipstick kit for most of our 11-000 series pans which have a 1/2" -20 oil level check fitting built into them. |
$24.95 |
 |
11-660 |
Ford 351W Left Turn Premium Oil Pan. Rear Sump, 10 Quart capacity |
$293.69 |
| 11-611 |
P/U Tube 3/4 Ford | $59.95 | |
 |
12-110 |
SB Chevy Shallow Low Ground Clearance Dry Sump Oil Pan |
$359.95 |
11-120 and 11-120T Oil Pans | PART# | DESCRIPTION | PRICE | |
|---|---|---|---|
 |
74-900 |
Pulley Shim Kit for shimming crank pulley's. Comes with 3 Aluminum shims. |
$15.95 |
 |
75-280 |
Power Steering Pulley This pulley makes mounting power steering on the head or the block easy. Just add it in front of the water pump and shorten your fan spacer. |
$31.99 |
|
Fan Spacers Include all bolts and washers. |
||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PART# | DESCRIPTION | PRICE | ||||||||||||||||
|
||||||||||||||||||
 |
80-000 |
Water Filler Neck Filler neck works on cars where the engine is the highest point. Necks have a fill point which allows air to escape the system. |
$53.95 | |||||||||||||||
 |
80-010 |
Bleeder Water Neck Bleeder water neck provides a positive way to make sure all air is bled out of the engine. Works with systems where an expansion tank is used as a fill point. |
$53.95 | |||||||||||||||
| PART# | DESCRIPTION | PRICE | |
|---|---|---|---|
 |
85-050 |
Phenolic spacer/adapter. Adapts the Holley #R4412 carburetor to a stock GM 2-barrel intake, extending the length of carburetor barrels for improved fuel mixture and distribution while providing a heat barrier to insulate carburetor. Complete with hardware and heli-coiled threads. |
$41.99 |
 |
85-060 |
Phenolic 1" Spacer. Adapt Holley 4412 2 BBL to Holley Flanged 4 BBL Manifold. |
$53.99 |
| 85-070 |
Phenolic 1" Spacer. Adapt Holley 4412 2 BBL to GM Quadrajet Manifold. |
$54.95 | |
| These adapter/spacers increases the barrel lengths for improved fuel mixture and are adjustable front to back. Comes with all hardware |
|||
|
|
Phenolic 4-Hole Holley Carburetor Spacers Four hole phenolic carb spacers for Holley 4150 and 4160 carburetors increase the barrel lengths to improve the fuel mixture and insulate the carb from engine heat, providing a denser fuel mixture and better performance |
||
| 85-150 |
Phenolic 1" 4 hole | $39.95 | |
| 85-152 |
Phenolic 1/2" 4 hole | $24.95 | |
| 85-160 |
Phenolic 1" Holley Open | $38.95 | |
 |
85-200 |
Phenolic 1" 4500 Open | $39.95 |
 |
85-250 |
Phenolic 1" Q-Jet Spacer This spacer for Q-jets extend the barrel length for better air fuel mixture and insulate the carb from engine heat, providing a denser fuel mixture and better performance. |
$39.95 |
|
||
|---|---|---|
| PART# | DESCRIPTION | PRICE |
| 24-006 |
3 Qt. 16" long 4-1/4" Dia. Manual Control Valve Accusump | $169.99 |
| 24-200 |
Accusump Mount Kit | $17.99 |
| Click Image for larger view | PART# | DESCRIPTION | PRICE |
|---|---|---|---|
| 22-570 |
Chevy Oil Bypass Eliminator | $31.95 | |
 |
CAN 20-031 |
PU Chevy 6 1/2 HV Pump Circle Track for 11-102 (Modification required, instructions included) |
$31.95 |
 |
CAN 22-541 |
SBC Remote Oil Cooler Sandwich Adapter. Chevy Oil Cooler Sandwich Adapters are machined from billet aluminum to provide strength, this adapter lowers the filter 1-1/2" and accepts 1/2" N.P.T. fittings. Comes complete with O-Rings and hardware. Eliminates factory bypass adapter. Oil goes to cooler after filtration. |
$75.95 |
 |
CAN 22-550 |
SBC Oil Input Adapter Chevy oil input adapter replaces the Stock Chevy Bypass, so the engine receives filtered oil all the time. Machined from billet aluminum, with two oil input ports, one before filtration (for an external oil pump) and one after filtration (for an ACCUSUMP). With these adapters the oil filter mounts in the stock location only 1-1/2" lower. This unit comes complete with O-Rings. |
$78.95 |
 |
CAN 22-565 |
Oil Input Billet Sandwich Adapter Oil input Adapter 3/4 -16 thread and 2-5/8" standard O-Ring. Universal Oil input Adapters are machined from billet aluminum, with an oil input port before filtration. These adapters mount the oil filter in the stock location only 1-1/4" lower, comes with O-Rings. |
$53.99 |
 |
CAN 24-260 |
Accusump Manual Ball Valve |
$10.49 |
 |
CAN 24-280 |
Accusump Oil Line Check Valve This Valve ensures all the oil being discharged out of an Accusump goes to lubricate the engine bearings and is not fed back toward the pump. To be used in a system where a remote filter or cooler is used. |
$23.99 |
 |
CAN 80-090 |
Filler Neck W/Mounting Flange This filler neck flange accepts a standard radiator cap and fits Chevy intakes. It can also be used as a replacement top for our water necks. |
$20.99 |
| Click the to add an item to your shopping Cart ( you can always remove it later) |
