| Holley Accessories | |||
|---|---|---|---|
| Part # | Description | Price | |
 |
 HLY 108-10 |
Base Gasket Model 4150 And 4160 Ea. 1 13/16" Bore 1/16" Thick Fits All 4 Bbl Pro-Jection Systems |
$8.25 |
 |
HLY 108-12 |
Base Gasket Model 4150 And 4160 5/16" Thick With Hardware (4 Studs & Nuts) Fits All 4-Bbl Pro-Jection Systems |
$16.25 |
 |
HLY 108-27-2 |
Secondary Metering Plate Gasket Fits Model 4160 2 per Package |
$5.95 |
 |
HLY 108-51 |
Base Gasket & Studs Fits Models 4150/4160 1 9/16" Throttle Bore 1/4" Thick |
$23.60 |
 |
HLY 108-8 |
Fuel Inlet Fitting Gasket Gasket Size (7/8") 0.875 in Fits Center Hung Float Bowls |
$5.25 |
 |
HLY 108-83-2 |
Fuel Bowl Gasket Secondary Fits Models 2300, 4150/4160, 4500 Two Circuit Carburetors Blue Non-Stick 2 Per Package |
$8.45 |
 |
HLY 108-90-2 |
Metering Block Gasket Fits 4160 and 4175 Secondary Only 2 Per Package 100 Bulk Available |
$8.29 |
 |
HLY 108-91-2 |
Blue Non-Stick Metering Block Gasket NOT FOR MODELS WITHOUT ACCELERATOR PUMP TRANSFER TUBE. Features Fits Models 2300, 4150, 4160, 4165, 4175 Blue Non-Stick 2 Per Package |
$9.95 |
 |
HLY 108-200 |
Meter Block Gasket Set (2300, 4150, and 4160 Carbs) | $10.25 |
 |
HLY 108-201 |
Meter Block Gasket Set (Some 4160 Carbs) | $11.25 |
 |
HLY 108-202 |
Meter Block Gasket Set (4175 Model Carb) | $9.50 |
 |
HLY 108-203 |
Metering Block Gasket Set (4165 Model Carb) | $9.50 |
 |
HLY 108-25 |
Flange Gasket For 4011 And 4165 Model Carbs | $17.95 |
 |
HLY 108-3 |
Throttle Body Gasket Models 4150/4160 Carbs Bore Size: 1 9/16 X 1 9/16 |
$4.75 |
 |
HLY 108-36-2 |
Meter Block Gasket Set Primary And Secondary Metering Block Gasket For Model 4500'S With Intermediate Systems |
$9.95 |
 |
HLY 108-4 |
Air Cleaner Gasket 5" Dia. .060 Thick | $5.25 |
|
HLY 108-5 |
Throttle Body Gasket | $4.05 |
| HLY 108-7 |
Throttle Body Gasket Models 4150/4160 Carbs Bore 1 3/4" X 1 3/4" |
$4.25 | |
 |
HLY 108-70 |
Carburetor Heat Shield Models 4010 , 4150 , And 4160 |
$21.95 |
| HLY 108-89-2 |
Metering Block Gasket | $8.95 | |
 |
HLY 116-1 |
Nitrophyl Side Hung Float | $10.25 |
| HLY 116-4 |
Brass Side Hung Float Alcohol Carburetor | $9.75 | |
 |
HLY 116-3 |
Center Hung Float Nitrophyl Float Kit |
$13.25 |
| HLY 121-132 |
Accelerator Pump Discharge Nozzle 0.032 in. Hole Size Straight Type Includes 2 Gaskets |
$12.59 | |
| HLY 121-140 |
Accelerator Pump Discharge Nozzle 0.040 in. Hole Size Straight Type Includes 2 Gaskets |
$11.99 | |
| HLY 122-100 |
Main Jets (2) Standard Main Jet 1/4-32 Thread NOT FOR USE WITH CARURETORS ORIGINALY DESIGNED FOR ALCOHOL |
$6.25 | |
| Holley Bypass Regulators | |||
|---|---|---|---|
|
|
HLY 12-803 |
High Pressure Regulator 3/8" Npt Ports .220 Restriction Includes Mounting Bracket High Pressure (4-9psi) |
$27.95 |
 |
HLY 12-807 |
Regulator Diaphagm Repair Kit For Hly 12-803 And 12-804 |
$6.25 |
| Holley Jet Kits Models 4150 And 4160 | |||
|---|---|---|---|
| HLY 36-201 |
Alky Jet Kit 48 Pairs Ranging From .132 To .200 |
$85.95 | |
| HLY 36-181 |
Gas Jet Kit 36 Pairs Ranging From .064 To .099 |
$50.95 | |
| Individual Pairs Of Jets Ranging From .040 To .152 | |||
 |
HLY 135-1 |
Accelerator Pump Pump Cup/Stem for model 4360 Holley Carburetors |
$7.50 |
 |
HLY 135-5 |
Accelerator Pump Diaphragm 30cc | $3.50 |
| HLY 135-7 |
Accelerator Pump Diaphram 50cc | $14.25 | |
| HLY 20-11 |
Accelerator Pump Kit 50cc Models 2300 , 4150 , And 4160 Kit Includes: New Pump Housing, Stud, Arm, Diaphragm, Spring, And Longer Pump Housing Screws |
$44.95 | |
 |
HLY 20-2 |
Throttle Ball Stud Assortment | $11.25 |
 |
HLY 20-45 |
Chevy Transmission Kickdown Cable Bracket For TH 350 Transmission |
$16.45 |
 |
HLY 20-60 |
Trans Kickdwn Kit This is the hardware kit needed when installing a Holley universal Carburetor w/1 mounting hole and locator pin to a Ford with Automatic Transmission. One Locator Pin Carbs w/30cc Accel. Pump |
$6.45 |
 |
HLY 20-7 |
Carburetor Throttle Lever Extension Will install on any Holley square flange carburetor with the universal throttle linkage. Usually used on Chrysler applications. Features For Square Flange Carburetors Relocates Mounting Point For Accelerator Cable readily accepts the Chrysler throttle lever stud for a simple and convenient throttle hookup. |
$8.25 |
 |
HLY 20-88 |
Throttle Spring Kit Chrome throttle cable bracket and throttle return spring installation. Features Includes dual stainless steel throttle return springs (P/N 20-89) Works on Holley models 4150 and 4160 carburetors |
$20.95 |
 |
HLY 20-91 |
Ford Transmission Hardware Kit This is the hardware kit needed when installing a Holley universal Carburetor with two mounting holes to a Ford with Automatic Transmission. Features wo mounting holes Carbs w/30cc Accel. Pump |
$8.45 |
| HLY 20-95 |
Overdrive Transmission Bracket Kickdown Cable Bracket For Use Only On Models 4150 & 4160 Carburetors with 700R 4 transmissions. Features Bolts On Carb. Flange Ear Effective Mounting Point For AOD Trans. Cable For Throttle Cable |
$19.95 | |
 |
HLY 20-40 |
Transmission Kickdown Stud | $6.75 |
 |
HLY 20-41 |
Ford Transmission Kickdown Lever Extension Used To Convert A 2 BBL. To A 4 BBL. Carburetor |
$5.75 |
 |
HLY 20-53 |
Vacuum Secondary Connecting Rod Model 4160 | $4.95 |
 |
HLY 20-59 |
Quick Change Secondary Spring Housing | $14.25 |
 |
HLY 26-114 |
Fuel Transfer Tube | $7.50 |
 |
HLY 26-25 |
Swivel Fitting 5/16" Hose 9/16"-24 Thread | $16.79 |
 |
HLY 26-26 |
Inverted Flare Fitting 3/8" Tube 7/8" - 20 By 5/8"-18 | $8.59 |
 |
HLY 26-43 |
Standard Fitting Tube 3/8" Tube 9/16"-24 By 5/8"-18 | $6.45 |
 |
HLY 26-44 |
Standard Fitting Tube 90 Degrees 5/16" Tube 1/2"-20 Thread |
$9.75 |
 |
HLY 26-68 |
Jet Removal Tool | $12.99 |
| HLY 34-13 |
Metering Block 4150 With Center Hung Float Bowls | $38.95 | |
| HLY 34-6 |
Metering Block 4150 With Side Hung Float Bowls | $39.95 | |
 |
HLY 36-176 |
Carburetor Carrying Case Made of durable plastic, it is designed to securely hold and protect your Carburetor during storage or transportation. There's even room enough to accomodate a dual feed fuel line, so it need not be disconnected from the carburetor. A neat carrying handle rounds out the package and adds convenience. Locking tabs promote security. This case can hold a Holley model 2300 Carburetor or any of the square flange four barrels. |
$59.95 |
| HLY 45-223 |
Electric Choke Conversion Kit Standard Finish w/Internal Vacuum Source (0-1850, 0-3310, 0-6425 or 0-7448) |
$52.95 | |
 |
HLY 45-224 |
Electric Choke Conversion Kit Standard Finish w/External Vacuum Source (0-4412, 0-4776, 0-4777, 0-4778, 0-4779, 0-4780, 0-4781, 0-6299, 0-6708, 0-6709) |
$52.95 |
 |
HLY 45-228 |
Choke Control Cable The perfect item to complete your purchase of the Holley manual |
$17.25 |
 |
HLY 45-258 |
Replacement Electric Choke Cap For Carburetor Models 2300 4150 4160 4010 4011 Also Fits Choke kits 45-223 & 45-224 |
$23.50 |
| Needles And Seats | |||
|---|---|---|---|
 |
HLY 6-500-2 |
Steel .110" Adj Pair | $35.95 |
| HLY 6-502-2 |
Steel .120" Adj Pair | $35.95 | |
|
|
HLY 6-504 |
"Viton" .110" Adj Ea. | $14.25 |
| HLY 6-506 |
"Viton" .097" Adj Ea. | $12.50 | |
| HLY 6-508 |
"Viton" .097" Adj Ea. | $13.25 | |
 |
HLY 6-513 |
"Viton" .097" Off Road Ea. | $20.95 |
|
HLY 6-515-2 |
"Viton" .130" Adj Pair | $21.95 |
| Click the to add an item to your shopping Cart ( you can always remove it later) |
