|
FUEL SYSTEM EQUIPMENT |
|||
|---|---|---|---|
| Part # | Description | Price | |
 |
 64920 |
Carburetor Linkage Bushing Kit Holley® 4 bbl Steel Linkage Bushing Set adapts 1/4" throttle stud to the 1/2" Dia. hole found in the throttle linkage plate of most four barrel carbs. Split bushing permits easy installation and eliminates the loose fit of rubber bushings. |
$5.89 |
 |
64923 |
Throttle return Spring Kit Holley ® 4500, Carb Mount |
$26.95 |
 |
64925 |
Throttle Return Spring Kit Small Block and 90º V6 Chevy Manifold Mount. 1-13/16" Tall |
$17.95 |
| 64928 |
Throttle Return Spring Kit Tall version to facilitate throttle return on spacer equipped Small Block and 90º V6 Chevy engines Manifold Mount. 4-3/4" Tall |
$29.95 | |
 |
64927 |
Throttle Return Spring Kit Works with 2300/2305 and 4150/4160 series carburetors. One set each of heavy and light springs are included |
$22.95 |
 |
64929 |
Throttle Return Springs | $5.95 |
| Plastic Carburetor Spacers Made of advanced plastic and phenolic resins with ten times more reduction of heat conductivity than aluminum spacers. Reduced fuel temperature results in a denser fuel mixture to the manifold and more power. Requires gaskets on both sides of spacer(not included). |
|||
 |
64930 |
Plastic spacer is 1" thick and fits Holley 4150/4160 and Edelbrock bolt pattern. Four hole plenum design with 1.75" dia. bores. Includes mounting hardware. | $29.95 |
 |
64940 |
Plastic spacer is 1" thick and fits standard square bolt pattern. Open plenum design. Includes mounting hardware. | $29.95 |
 |
64943 |
1/2" 4-Hole Plenum design with 1.75" diameter bores | $31.95 |
| 65011 |
2" 4-Hole Plenum design with 1.75" diameter bores | $84.95 | |
 |
65042 |
Throttle Stop Works with Holley 4150 style carburetors. It provides a strong, positive stop, and also prevents excessive side loading on the throttle shaft which can cause shaft bores to wear out. Stop is adjustable and mounts to carb hold-down stud. Fits both 1:1 and progressive linkages. Made of 1/8" steel with clear zinc finish. |
$24.05 |
 |
65125 |
3/8" Super Cool Can Advanced heat sink design decreases fuel temperature 20% over other cool cans |
$99.95 |
 |
65130 |
Streamline Fuel Line Fitting. 90º, 3/8" NPT to 1/2" hose |
$16.95 |
| 65140 |
Streamlined Fuel Line Fitting 90º, 3/8" NPT to 3/8" hose |
$13.99 | |
 |
65222 |
Reusable Buna-N Holley® Neoprene Metering Plate Gasket. Replaces Holley® Part No. 108-29, 2 per Package |
$6.95 |
| 65223 |
Reusable Buna-N Holley® Neoprene Metering Plate Gasket. Replaces Holley® Part No. 108-30, 2 per Package |
$6.95 | |
| 65224 |
Float Bowl Gasket. Reusable Buna-N Holley® Replaces Holley® Part No. 108-32 and 108-33 2 per Package |
$6.95 | |
 |
65225 |
Float Bowl Washer Kit for Holley Carbs | $6.95 |
 |
65226 |
Clear-View Sight Plugs for Holley Carbs | $5.95 |
 |
65227 |
Carburetor Jet Extension Kit Fits Holley® 2 bbl and 4 bbl Carbs |
$11.50 |
 |
65228 |
Drag Race Float Kit Fits Holley Carbs Notched to Clear 3/4" Jet Extensions |
$19.50 |
 |
65375 |
Fuel Hose Fittings 1/4" NPT to 3/8" Hose |
$4.95 |
| 65380 |
Fuel Hose Fittings 3/8" NPT to 3/8" Hose |
$6.99 | |
| 65390 |
Fuel Hose Fittings 3/8" NPT to 1/2" Hose |
$8.75 | |
| 65392 |
BBC Fuel Pump Block-Off Plate Also fits 273-440 Chrysler and All Fords except 351C, 351M, and 400. |
$6.49 | |
 |
65414 |
Holley Fuel Bowl Screws Hex Head Fuel Bowl Screws for Designed for Holley® 4150-4165 and 4500 model carburetors Hex head (rather than screwdriver head) allows for easier removal of the fuel bowl 4 per package Screws are 2-1/2" long |
$8.85 |
| 65424 |
Holly Quick Cover | $9.22 | |
 |
65425 |
Holley® Vacuum Secondary Spring Kit Contains 7 Springs Coded from Light to Heavy |
$14.50 |
 |
65426 |
Holley® Vacuum Secondary Diaphragm Replaces Holley Diaphragm 135-4 |
$12.95 |
 |
65750 |
Lightweight Fuel Pump Pushrod Small and Big Block Chevy |
$19.95 |
 |
65770 |
Fuel Pump Spring for Holley® Electric Fuel Pumps | $4.50 |
 |
65805 |
Carburetor Drain Cup | $8.95 |
| 64971 |
Carburetor Spacer 2" Spacer |
$76.95 | |
| Click the to add an item to your shopping Cart ( you can always remove it later) |
