Poske Performance Parts

Friday 09th of May 2008

Categories

Merchants

Oil Control
These DIrt late Model 4 Stage Pans (21306PP and 21415PP) were specially designed by Dave Poske's Performance Parts Notched for clearance of the servo and Rack and Pinion. Innovative multi-scraper windage system uses two strategically placed scrapers to strip oil quickly from the rotating assembly, reducing windage for increased power Each scraper can be trimmed to match specific crank and rod combinations, maximizing its ability to reduce windage. Full length power kickout provides an "escape route" for oil leaving rotating assembly to reduce windage and increase power. Wire cloth windage tray screen directs oil into sump area without allowing it to splash back onto the rotating assembly Cleasrs all aftermarket 4-bold main caps Investment coast end caps provide extremely tight tolerances to eliminate annoying leaks Three -12AN male pickup fittings on passenger side Ue with reverse-mount starters this pan is clearanced for stroker craks and has enought material in the pan rails for added clearance if necessary.
Part #		Description	Price
	21306PP	Dry Sump Alum Oil Pan GM Block	$589.00
	21415PP	Dry Sump Alum Pan Dart Block	$659.00
Part #		Description	Price
	20160	Oil Pan SBC 7 Qt.	$131.95
	20165	Painted Steel, 7 Quart Deep Sump Pan 1980-85 blocks with passenger-side dipstick	$131.95
	24340	Pickup for #20165 Oil Pan (M55HV Pump)	$36.95
	24350	Pickup for #20180 Oil Pan (M55HV Pump)	$39.95
	21308	SBC Sportsman Pan. 7 Quarts.	$129.95
	24308	SBC Oil Pump Pick-Up goes with MOR 21308 Pro	$42.95
	21318	7 Qt. Circle Track Premium Wet Sump Oil Pan Newly designed pan and Louvered Windage Tray increases power, improves oil control and reduces temperature much more efficiently than previous combinations Windage Tray is removable to facilitate cleaning Kicked-out sump moves oil level away from rotating assembly, increases capacity to 7 quarts and provides additional ground clearance Sump is fully baffled with 5 trap doors to provide uninterrupted oil supply under left-turn-only racing conditions Sump tray keeps oil contained in pickup area Threaded oil level sight plug built directly into sump Fitting provided for oil temperature sender Accepts strokes up to 3.800"; works with most starter/flywheel combinations NOTE: OIL PAN CAPACITIES DO NOT INCLUDE OIL FILTER CAPACITY. Use Moroso MOR 24104 pick up w\ M55HV Oil Pump. When using M55HVP Oil Pump, use Canton CAN 20-072 with 3\4î pick up tube.	$239.95
	24104	SBC Oil Pump Pick-up Tube Oval Track Fits MOR 21318 Pro Oil Pan w/ M55HV Pump 5/8î Tube	$39.95
	22162	Oil Pump Blueprint SB Chevy	$124.95
	22000	Oil Restrictor Kit SBC and BBC engines, .060" diameter orifice Diameter Oil Delivery Holes at Rear Cam Bearing. Must be tapped to install. (2 per Pkg)	$6.75
	22016	Oil Restrictor Kit Billet aluminum restrictors screw in flush with block, providing adequate clearance for flywheels and flexplates on newer GM style blocks with oil gallery bosses flush with bellhousing. They are pre-drilled with .060" diameter orifices to restrict oil flow to top end, leaving more oil to lubricate main bearings and other critical engine compinents. Ideal for use with Chevy Bow Tie and similar blocks. Not for use with hydraulic lifters. (2 per Pkg.)	$17.95
	22010	Oil Restrictor Kit SBC and BBC Engines, .0625" orifice diameter. Screws into existing Lifter Gallery Cleaning Plug holes at back of block (2 per Pkg)	$10.25
	22070	Oil Pump Shaft Small Block Chevy and 90º Chevy V6	$14.50
	22080	Oil Pump Shaft Big Block Chevy. (exc Gen V/VI)	$14.50
	22605	10AN-10AN Oil Fitting	$25.95
	23690	Oil Filter Adapter Eliminates the need for a remote oil filter and associated hardware. Both adapters will fit SBC with no modification and BC with minor block modifications and are fitted with 1/2" NET inlet and outlet. Will lower filter by 1 1/2". Instructions, mounting bolts and O-rings included.	$82.95
	23692	Oil Filter Adapter for plumbing Remote Oil Coolers. Flow direction: inlet left side, outlet right side	$87.95
	23750	Remote Oil Filter Mount Accepts Chevy V8 type spin-on oil filters. Flow direction: inlet right side, outlet left side	$42.95
	23760	Remote Oil Filter Mount Accepts Chevy V8 type spin-on oil filters. Flow direction: inlet left side, outlet right side	$42.95
	23770	Oil Filter By-Pass Oil Filter By-Pass fits all SBC V-8's. For use with wet sump oil systems when remote oil filters or coolers are used. By-passes are cast from aluminum with 1/2" NPT inlet and outlet. Comes with all necessary gaskets and fasteners.	$27.95
	23782	Billet By-Pass World Products Merlin Big Block or standard Small Block and Big Block (Mark I) Chevy applications without bolt hole at center of filter pad	$54.95
	23790	SBC Oil Pump Block	$15.95
	23850	In-Line Screened Oil Filter 5/8" -10AN fittings	$50.95
	23860	In-Line Screened Oil Filter 3/4" -12AN fittings	$50.95
	C3028	Driveshaft Loop	$43.25
	C7058	Wheel-E- Wheel W/B	$37.39

Click the

to add an item to your shopping Cart
( you can always remove it later)

Checkout or View Cart

If you encounter problems using this site, please send details to:
Web Pages Copyright © 1998 - 2008 by Poske's Performance Parts. All Rights Reserved.
Prices subject to change
Orders Under $50.00 Subject to $5.00 Handling Charge