|
SPECIAL TOOLS |
|||
|---|---|---|---|
| Part # | Description | Price | |
 61744 |
Universal Harmonic Balancer Installation Tool Includes screw-in Inserts for 7/16î, 1/2î, 5/8î, and 3/4î Threaded openings |
$44.95 | |
 |
61820 |
Engine Cleaning Brush Set There are two each of the oil gallery brushes, since they get the the most wear. They can also be used on crankshaft oil holes, cylinder heads, etc. Nylon bristles clean as well as wire, but will not scratch. Set of 12 |
$28.95 |
 |
62010 |
Spring Loaded Pit Socket Considerable research went into the development of this tool. The six-point, thick-walled alloy steel socket with large chamfers insures fast, clean engagement on the lug nut and the integral spring provides sure ejection of the lug nut from the socket. Heat treated for maximum strength and minimal lug nut damage. Accepts 1/2" drive. Fits 1" lug nuts. |
$39.95 |
 |
62030 |
Coil Over Shock Adjusting Tool Quick, accurate adjustment of coil-over shocks is easier. Use adjust Koni, Bilstein, Carrera, Monroe and most other coil-over shocks with up to 3 1/4" diameter adjusting nuts. Cast steel construction. |
$22.95 |
| Moroso Degree Wheels accurately measure several timing functions including camshaft centerline, valve timing, TDC , and BDC, all marked in easy-to-read, 1 degree increments. Wheels are made of heavy gauge metal for long lasting use. | |||
 |
62190 |
11" Degree Wheel 11" Degree Wheel is primarily used in-car or at the track. Adapter is included to fit most engines. |
$31.95 |
 |
62191 |
18" Pro Degree Wheel 18" Degree Pro Wheel for engine stand perfection when timing. Adapter is included to fit virtually any engine. |
$45.95 |
 |
62200 |
Oil Pump Primer | $13.95 |
 |
62260 |
General Purpose Wire Crimper Made of high carbon steel with black oxide finish; the plastic hand grips are non-conducting and non-slip. |
$36.95 |
 |
62293 |
Jet Tool Fits All Holley Type Jets |
$10.25 |
 |
62300 |
Compression Ratio Tool for Small Block Chevy and 90º V6 Chevy |
$5995 |
 |
62370 |
Stud Mount Valve Spring Compressor Will fit both 3/8" and 7/16" studs. The 12" handle affords the leverage to adjust the stiffest springs, and is much stronger to withstand the extremely high pressures of modern race valve springs. |
$82.95 |
 |
62372 |
Stud Mount Valve Spring Compressor Conversion Kit Contains all part necessary to convert Part No. 62370 to fit Jesel Rocker Shaft Valve Springs |
$51.95 |
 |
62385 |
Universal Spark Plug Hole Air Hose Kit |
$28.95 |
 |
62390 |
Valve Seat Pressure Tester The integral, direct-read scale reads from 0-300 psi and is accurate within 3%. Tester eliminates the need for mathematical conversions often required with torque wrench adaption devices. Use with MOR 62370 Stud Mount Valve Spring Compressor for the quickest and most accurate method of maintaining the valve train. Fits aluminum rockers only. Use on small block, big block and 90 degree V6 Chevys, 221-302-351 Windsor Fords, and 351-400 Ford SVO Fords. Can also be used on most other wedge engines with rocker shafts and aluminum rockers. |
$72.95 |
 |
62160 |
Spark Plug Indexer Designed for both flat and taper-seat 14mm spark plugs. Black-anodized so that marks can be placed on the outer surface for checking subsequent sets of plugs. |
$9.95 |
 |
61755 |
Crankshaft Socket for Degree wheel Small Block and 90º V6 Chevy Super Duty Pontiac/GM 4 Cylinder |
$52.95 |
| 61756 |
Crankshaft Socket for Degree Wheel Big Block Chevy |
$52.95 | |
 |
61760 |
Crankshaft Socket Tool Small Block and 90º V6 Chevy Super Duty Pontiac/GM 4 Cylinder |
$25.95 |
| Click the to add an item to your shopping Cart ( you can always remove it later) |
